Custom UV DTF Wrap Transfer (You Provide File) 16oz | No Heat Needed | Waterproof | Permanent Adhesive (You Provide File)

Custom UV DTF Wrap Transfer 16oz for Glass Libbey Jar. Can also be used for tumbler such as 40 ounce tumbler top section or can cooler or coffee mug.

Most wrap dimensions are 9.4 x 4.4 or sized around there for proportion

Must provide PNG file (select custom listing if you need help creating a design)

Please email to Tina.stoughton2@gmail.com AND include order number :)

Directions:
Simply peel, stick, rub air bubbles out, and remove top film for a permanent waterproof decal.

These decals are perfect for Libbey jars, glass beer can & snow globe tumblers (16oz).

To apply decal to a surface, follow these easy steps:

Step 1: Clean and Prep
Wash your cup with soap and dry completely. DO NOT USE ALCOHOL as it will break down the adhesive.

Step 2: Position and Secure
Place the cup on the hard, straight surface, then start peeling the backing as you roll the cup. Once the decal is on the cup, take time to push the decals onto the surface. I usually push between 3-5 minutes with my palm, using body temperature to activate the UV DTF adhesive. Doing this will make your peeling step so much easier, and decals will have less lifting. Transfer is NOT removable or adjustable once it is applied to a surface.

Step 3: Remove Backing
Very slowly peel off the backing paper from the decal, ensuring it doesn't stretch or tear. If any part of the design lifts up as you peel, go back, gently push down on that area, and then resume peeling.

Step 4: Smooth It Out
Use your fingers or palms to smooth out the decal starting from the center and moving outward.

Step 5: Activate
DO NOT wash or use the finished project for 24-48 hours to allow the adhesive to strengthen on the glass or cup.

*Please note we are not responsible for UV DTF transfers that are applied incorrectly or damaged during application. No refund or exchange will be offered.